Heat pump - fully installed

OneCo delivers some of the best heat pumps on the market!

Click here to go to the contact form

A heat pump gives you many benefits, such as saving energy, increasing comfort and improving the indoor climate.
The heat pumps are easy to use and can also be used for cooling in the summer.
Air-to-air heat pumps are the most common type of heat pump in Norway. The pump extracts heat from the air outside and blows it into the home.
Modern pumps can operate as low as -25°C

With built-in WiFi control, you get full control of consumption and temperature. 

Toshiba Signature 25

• Interior with textile upholstery
• Energy class A+++
• SCOP 5.1
• Beautiful design
• Powerful and efficient
• Built-in wifi and management app
• Standard colour granite and slate
• Optional textile cover in the colour sea, dark glacier, sand or warm earth 1000,- kr. Incl. VAT

Mitsubishi Kaiteki 6600

• High energy efficiency class A+++
• Colour in the offer: Standard white
• Other colours available: Pearl White, Sapphire Black and Ruby Red (+£2,000 inc VAT)
• High energy efficiency class A+++
• Built-in WiFi and connection to MelCloud
• Up to four operating intervals per day
• Night mode
• i-See Sensor with 3D technology
• i-Save. Maintenance heat steplessly from 10 to 31°C
• Mode Lock, function lock
• Refrigerant, R32
• Dual Barrier Coating, Protective coating

Panasonic Z25

• New floor model from Panasonic with R32 gas
• High energy efficiency class A++ SEER and A++ SCOP
• nanoe™X with nanotechnology - nano-sized atomised electrostatic water particles clean the air in the room
• Super quiet technology, only 20 dB
• Dual airflow for improved comfort and temperature dispersion: through the top for efficient cooling mode.

 *OneCo currently only delivers heat pumps in Agder county. See also terms and conditions for standard installation at the bottom of the page.

Need help choosing or want an inspection?

Contact us via form, email or phone:
Email: [email protected]
Tel: 982 40 800

Terms for standard installation heat pump:

• Up to 4 metres of insulated copper pipes w/duct - 1/4″-3/8″
• Wall bracket for outdoor unit including vibration dampers.
• Test and commissioning of the heat pump, as well as introduction to use for the customer.
• Driving up to 50 km per hour.
• Installation of the indoor unit on the outer wall up to 2.5 metres above the floor.
• Outdoor unit max 1.5 metres up the wall.
• Electrical connection between indoor/outdoor unit.
• Power supply is not included in the standard installation. Subject to existing plugs being used.
• The customer is responsible for an earthed and earth-fault-proof plug with sufficient power.
• Surcharge for any core drilling and penetration in masonry (to be agreed with installer)
• Supplement for exterior wall penetration at TEK10 or higher

Service heat pump:

• Performance testing, temperature and pressure checks
• Cleaning indoor unit, cleaning register and filter
• Cleaning outdoor unit
• Lubrication of slide bearings in the inner part
• Battery replacement and function test remote control. Check of any error codes
• Checking the condensation hose
• Check cables, pipes, pipe insulation etc.
• Leakage control of the system and checking that there is sufficient refrigerant in the system
• Visual check of the heat pump system
• Driving up to 50 km per hour. 

Pricing is coming - submit your enquiry today and we'll send you a quote.